Six special steps of glass beads making process
Glass beads, maybe many people do not know what it is, maybe many people have never heard of it, but in the city, people who shop or exercise at night should notice that the zebra crossings and no-stop lines on the traffic road are illuminated by the lights Very bright light will be reflected underneath.
Text label：
Glass beads, maybe many people do not know what it is, maybe many people have never heard of it, but in the city, people who shop or exercise at night should notice that the zebra crossings and no-stop lines on the traffic road are illuminated by the lights Very bright light will be reflected underneath. In fact, these are glass beads. In addition, the traffic signs are also equipped with glass beads, which will reflect at night, let people see their location more clearly, and guide people to travel safely.
Glass beads have the following manufacturing steps:
1. The production of glass microbeads first requires the selection of raw materials. The quality of the raw materials determines the quality of the glass microbeads produced in the future. The raw materials should be clean and free of impurities, glass with good strength and toughness.
2. Choose good glass and then crush the glass sand. Use glass to crush into glass sand. According to the size of the particle size, smash it into uniform and moderate glass sand so as to save manpower and material resources when firing.
3. Crushed glass sand, make the sintering furnace by yourself, adjust the temperature of natural gas to 1200 degrees, you can cut the material and fire it, and check the quality and hardness while firing.
4. The semi-finished products of fired glass beads go to the vibrating screen to be screened.
5. Stir the sieved glass beads according to a certain ratio.
6. Pack and export.
2017-06-02
1797People browsing
